Workplace hazards vary widely across the sectors of the agricultural industry, for example, a dairy worker will face different daily challenges to a grain grower. However, the safety messages remain the same when it comes to hazards on a farm. Maintaining a healthy and safe workplace is centred on prevention, awareness and constructive solutions.
According to Safe Work Australia, "Over the last five years (2015 to 2019), there were 174 worker fatalities in the Agriculture industry, which is 19% of all worker fatalities over the period."
In Australia alone, there were 4,163 dairy farmers operating in 2022/23 with 33,500 people employed by a dairy farm and processing companies.
Figures show between 2014 and 2018, there were 11 fatalities in dairies of which most resulted from vehicle incidents (42% in 2018). The main causes of serious injury are being hit by an animal (22%); falls on the same level (13%); and vehicle incidents (10%).
The dairy industry’s safety challenges come from:
A few solutions include animal handling training which leads to improved understanding of cow behaviours, wearing the correct personal protective equipment (PPE) including non-slip waterproof boots, and appropriate machinery maintenance, guarding in place and ensuring all operators are licensed or trained where appropriate. Read about the top 5 hazards in dairy.
Did you know that the total vineyard area in Australia in 2022 was estimated to be 146,244 ha? South Australia accounted for 52%, New South Wales 24% and Victoria 15%.
Wine Australia estimated in 2021/22, 2,156 wineries and approximately 6,000 grapegrowers employ 163,790 full and part-time employees across 65 winegrowing regions in Australia.
Across the grape growing and wine manufacturing industries, injuries to workers from fatigue and poor manual handling techniques are the core areas for concern.
Common causes of injury experienced by workers in vineyards and wineries include:
Some solutions include appropriate training and licensing for machinery operators, particularly seasonal workers, reducing slip, trip and fall hazards through good hygiene practices, and ensuring workers have access to the correct personal protective equipment to prevent weather and noise exposure.
In 2021/22, the Australian horticultural industry was responsible for 6,619,877t produced and valued at $15,959.2M (not including cut flowers,
nursery and turf products).
Horticulture is an industry reliant on manual activities including harvesting and packaging of fruit and vegetables. Manual handling injuries can result either from gradual wear and tear over time or sudden damage and the focus should be on minimising the risk.
Some common risk factors for manual tasks include:
Consider modifying tools and equipment or using mechanical aids such as pallet jacks, trolleys and height adjustable work benches, changing working hours to allow for hard work to be undertaken during the cooler times of the day, and modifying loads by size or weight or container to lessen manual handling stressors.
According to the GRDC, "Often considered the quiet achiever in Australian agriculture, the grains industry notched up another impressive year in 2022-23 with the Australian Bureau of Agriculture Resource Economics and Sciences (ABARES) putting the sector’s total value at $31.1 billion, with wheat earnings alone over $15.7 billion." The GRDC also noted that in 2022/23 recorded a crop of 70.8 million tonnes, after producing 66.5 million tonne in 2021/22.
Key hazards for grain growers centre on plant and machinery, confined spaces, chemicals, fatigue and falls. Fatigue is a safety risk that is commonly underestimated, but cause of incident figures show it to be a key factor, especially during certain times of the season. Falling asleep is a real risk when working longer hours at those critical times such as seeding or harvesting.
Some solutions include planning adequate rest breaks, wearing correct personal protective equipment and weather appropriate clothing, installing guards on machinery and having up-to-date maintenance plans in place and ensuring elevated work areas have guard railings or other forms of fall prevention in place.
Solutions for plant and machinery include ensuring proper guards are in place especially for things like augers and PTOs. Confined spaces, working at heights and chemical use have short courses to train workers how to manage these safely.
According to Meat and Livestock Australia, "In 2021–22, Australia’s red meat and livestock industry turnover was $75.4 billion, or around 1.7% of Australia’s total key industry turnover. New South Wales (28%), Victoria (24%) and Queensland (21%), represent the majority of turnover within the industry, with Western Australia (13.7%), South Australia (8.5%), Tasmania (3%) and the Northern Territory (1%) rounding out the remaining turnover."
Workers in livestock industries need a basic understanding of animal behaviour and livestock control procedures. Hazards in this industry that can be controlled include equipment maintenance, animal movement procedures and manual handling.
Try including regular stockyard maintenance for gates, ramps and loading equipment, separation and access procedures for people and livestock, plant and equipment maintenance, and good housekeeping practices in terms of maintaining effluent drainage and clearing grates to reduce risk of trips and falls. Gentle handling of livestock will reduce the risk of harm to workers and the animals, for example allowing sheep to settle for at least half an hour before shearing should reduce the risk of injury to the shearer as the animal will be calmer. Learn more about the top 5 hazards in shearing.
Disclaimer: Content on this website may be of relevance to users outside of Australia, but content links and examples are specific to Australia. Please check with your local authority for your country and industry requirements.